Wireless Electronic Notice Board using GSM
Created: Oct 08, 2014
No description available.
This project demonstrates how to design a wireless electronic notice board using SST89E516RD-40-C-PIE microcontroller. The notice boards are important in public places like railway stations, parks and airports. Presently almost all electronic notice boards are designed using wired system. One of the drawbacks of the design is the system's flexibility in terms of placement. The aim of this project is to develop a wireless notice board that can be installed in any public areas and will display the latest information sent from the user's mobile.
The above circuit consists of Microchip Technology's SST89E516RD-40-C-PIE microcontroller, GSM module, level converter and 16x2 LCD. The LCD is connected to P1.0 and it is used to display message. The GSM module is connected to the SST89E516RD-40-C-PIE microcontroller through the MAX232 IC. Only four data lines are required to display the data, which are connected to P1.4, P1.5, P1.6 and P1.7 respectively. In order to communicate with GSM, some AT commands are sent through the serial connection (UART Protocol). The module requires 9600-baud rate. The GSM modem is duly interfaced through level shifter IC for establishing RS232 communication protocol to the microcontroller. The message received is sent to the microcontroller that further displays it on electronic notice board, which is equipped with a LCD display. It is interfaced to a microcontroller from 8051 family duly powered by a regulated power supply.
This GSM based e-notice board has various applications used in several domains including banks, stock exchanges, traffic control, public advertisements, and educational sectors. Further development to this project can be done by providing message storage facility by non-volatile memory i.e. EEPROM attached to the microcontroller for retrieval of old messages if required. It can also be expanded to a bigger LCD screen.