Neil Edward

user ELECTRONICS ENGINEER

city INNOVUZE SOLUTIONS INCORPORATED


  • FM Wireless Transmitter Circuit

  • Created: Feb 20, 2014

    • view1668
    • comment0
    • bookmark1
    • fork0

Description

No description available.

Summary

This simple circuit provide a enormous role in broadcast communication. It receives an audio signal that mix with the FM frequency range signal. The output signal is received by a tuned FM receiver.


The circuit is supplied by a 9V battery and the 0.047uF capacitor is used for the stability. The circuit is supplied to the resistor 27kΩ positive in the leg microphone,and it is way out of with the audio signal,through the coupling capacitor to pin B of the transistor. The 2N2222 transistor act as both the radio frequency generator and the audio mixer on the radio frequency generated. The resistor 27kΩ and 4.7kΩ are divider circuit to bias the transistor. The coil uses a copper wire No. 19-20 AWG, wrapped around the air core diameter of 7 mm. The 5pF to 20pF trimmer capacitor is used as the tuner. The pin C of the transistor is connected to the antenna with the coil with wire No. 16-20 AWG, 7 inches in length, curled into a circle like a spring about 6 mm in diameter.


The circuit is applicable to short distance wireless communication and also in broadcast communication.

Details


Components:

  • No components added

Tags:

Application:

  • No project application added

Type:

  • No project type added